Our Branches Info

Info

+383 (0) 38 400 888
+383 (0) 49 777 075
+383 (0) 49 779 994

info@m-technologie.com
shitja@m-technologie.com

Follow us

Alumin-Produktet---1

Schüco FWS50

The FWS 50 facade system offers a wide range
of design freedom in vertical facades
and lanterns. This system meets the
ecological requirements for durable products,
certified according to "Cradle-to-Cradle Certified TM".
Vertical and horizontal profiles of this system of the facade
are easily combined with other systems
that have high energy efficiency.

Alumin-Produktet---2

Schüco FWS50 SG

The aesthetics of the object is now more suitable for the use of FW50 + SG, as the profile is visible only inside the premises.

Alumin-Produktet---3

Schüco FWS60

New profile integrated system solution for shoulder safety barriers with a high degree of design freedom and better thermal insulation properties. Additional system modules also facilitate simple and secure integration of electrical components.

Alumin-Produktet---4

Schüco FWS60 SG

The system also allows facades to be designed with a semi-structural appearance. The profiles are visible only on the inside but also with the possibility of decorative lids on the outside.

Alumin-Produktet---5

Schüco FWS 35PD

With the solution of the advanced Schüco FWS 35 PD Panorama design facade system, it is possible to achieve light architecture with maximum transparency, even in the corner areas of buildings. Since vertical profiles are not used in corner areas, a high quality design is achieved, with minimal space between two partitions.

The scope of this system offers a wide range of accessories with a high level of production reliability, such as discrete connection components for sun protection systems, as well as solutions tested for theft resistance up to security levels RC2 and RC3.

Alumin-Produktet---6

Schüco AOC 50&60 standard, HI & SI

The SCHÜCO AOC 50 & 60 system enables the placement of the facade in metal and wooden constructions.

Characteristics of the facade with wooden construction:
• Certified with the highest quality of facades by the "Passive House" institute in Darmstadt.
• The thickness of thermopack glass is 40mm on the facade and 48mm on the lantern.
• Horizontal profiles withstand glass load up to 750kg.
• Enables the integration of solar systems in the Schüco ProSol TF+.

Characteristics of the facade with metal construction:
• Certified with the highest quality of facades by the "Passive House" institute in Darmstadt.
• The thickness of thermopack glass is 46mm on the facade and 52mm on the lantern.
• Horizontal profiles withstand glass load up to 750kg.
• Enables the integration of solar systems in the Schüco ProSol TF+.

Alumin-Produktet---7

Schüco UUC 65 SG

Features and benefits:
• Facade is integrated with the layout of the glazing structure.
• Value of UF up to 2.2 W / m2 K.
• Excellent durability.
• High stability of the unit due to profiles.
• The narrowest possible width of system is 65 mm.
• Optimal ventilation with integrated opening means in the unit (Schüco AWS 102).
• E-connect: Possibility of electrical wiring within the e-Box unit.
• Excellent construction with parameters verified by independent tests.

Alumin-Produktet---8

Feal 50FK - continuous

FEAL 50FK system with profile width of 50mm like other facade systems, this system also enables the integration of doors and windows with openings from inside and outside.
Thermal insulation of profiles up to (Uf ≥ 0.72 W / m2 K as well as resistant to wind pressure up to 3.0kN / m2).

Alumin-Produktet---9

Feal 50FS - continuous

FEAL 50FS system with profile width of 50mm and structural joint with width of 20mm, Like other facade systems, also and this system enables the integration of doors and windows with openings from the inside and outside. Thermal insulation of profiles up to (Uf≥0.72 W / m2K as well as resistant to
wind pressure up to 3.0kN / m2).

Alumin-Produktet---10

Spider façade

Spider facade with safety glass is a facade without visible load-bearing structure. Due to its visual appearance, spider facades are commonly used in hotels, airports and administrative buildings. The methods used for fixing the glass panels are realized using special accessories made of stainless material. In architectural terms spider facade allows great space in the development of final solutions.

Alumin-Produktet---11

Ventilated facades

Composite panels are usually large format facade panels consisting of a durable base material and two covering layers. The composite structure makes them very resilient and enables architects to create compelling architectural designs. They are offered with a wide range of cover layer colors.

Alumin-Produktet---12

Facade from composite panels HPL
(High Pressure Laminate)

Facades from composite panels HPL (High Pressure Laminates - Laminates produced in high pressure), have in their composition various chemical substances that give them certain characteristics.
These panels contain a layer of polyurethane, which protects the panel from solar effects and weather changes, provide additional waterproofing to the panel and generally the facade, have physical resistance to scratches and external blows and are fire resistant.
HPL panels are offered in various dimensions giving unlimited options for combining shapes, giving unlimited options for combining shapes.

Alumin-Produktet---13

Facade from composite panels – Aluminum

This type of facade is applicable in all cases when additional coating of concrete walls is required, or any type of enclosed wall and surfaces, in such a way as to give the final look to the building, fulfilling the thermal and decorative requirements. Different requirements of designers and investors have resulted in the development of different types of ventilated facades.

Alumin-Produktet---14

Stone façade

The stone facade allows moisture to get out and prevents it from getting inside. This type of facade can be realized with visible or invisible clamps.
Nënkonstruksioni i aluminit: Trashësia e gurit 20, 25, 30mm.
Aluminum substructure: Stone thickness 20, 25, 30mm. The horizontal joint width of the load-bearing substructure is 600, 900 and 1200 mm.

Alumin-Produktet---15

Ceramic facade

Aluminum substructure: The thickness of the ceramic can be 8-16mm. Horizontal nod width 6mm.
The horizontal raster and a bearer substructure is 300, 600, 930, 1030 and 1200 mm.
This type of facade can be realized with visible, invisible and semi-visible clamps.

Alumin-Produktet---16fin

Fixed and rotating brisollets

Brisollets can be applied in various interiors and exteriors. In the interior they are used as visual partitions for different needs.
On the outside they are usually used as durable compact shades that control the penetration of sunlight, and heat in the residential area while resisting rain and protecting from view and wind.

Alumin-Produktet---17

Schüco AWS/ADS 65

The ADS 65 system offers Ufmax = 2.2W / m2 K and easy operating mechanism. Fracture resistant up to RC3 scale (WK3).

Alumin-Produktet---18

Schüco AWS/ADS 70 HI

The Schüco AWS / ADS 70 HI offers excellent insulation solutions with a profile thickness of 70mm. Ufmax value = 1.7W / m2 K and has a easy operating mechanism. Fracture resistant up to RC3 scale (WK3).

Alumin-Produktet---19

Schüco AWS/ADS 75 SI+

The AWS / ADS 75 SI + system has a high thermal performance with a profile thickness of 75mm, easily integrated into the facade. Reaches the value Uf = 1.2W / m2 K in the optimized version and with some adjustments of the insulators can be reduced up to Uf = 1.1W/m2 K.
Contains fully hidden mechanism inside profiles with an opening of 180 ° and shoulder weight up to 250kg.
Possibility of realizing flat panel doors by completely hiding the wing profile. Fracture resistant up to RC3 scale (WK3).

Alumin-Produktet---20

Schüco ASS 70 HI

With a high thermal insulation ASS 70 HI system with the possibility of sliding openings and lifting-sliding, creates high opportunities for high wing width. Suitable solution for commercial as well as luxury residential projects.
With the possibility of including Schüco SmartStop and Schüco SmartClose comfort technology which operate easily and safely.
Achieving the value Uw <1.3 W / (m2K) depending on the glass configuration.
Shoulder weight up to 300kg, with additional mechanism up to 400kg.
Shoulder size up to 9m2 with high transparency and maximum light penetration.
Perfect drainage with resistance to water permeability up to 1050Pa.
Fracture resistant up to RC2 scale (WK2).

Alumin-Produktet---21

Schüco ASS 70 FD & ASS80 FD

Schüco ASS70FD and ASS80FD.HI system is a harmonious door system which offers additional designs thanks to the opening type 900 with thermally insulated floor.
Achieving the value Uw <1.2 W / (m2K) up to Uw = 1.7 W / (m2K) depending on the glass configuration.
This system can be applied to many destinations such as commercial or residential. 

Alumin-Produktet---22

Schüco ASS 77 PD

The system enables a very high level of transparency allowing us to have as many visors as possible. ASS77PD SI system enables unique thermal insulation from UW = 0.84W / m2 K. ASS77PD.HI system high combination of aluminum with different thermal divisions offers UW = 1.0W / m2 K. The ASS77PD.NI system is suitable for outdoor use. Indoor or even outdoor application where there are warm climatic zones as it offers thermal Uw = 1.9W / m2 K.

Alumin-Produktet---23

Schüco ASE 60/80 HI

The thin profiles of the system enable to overcome the glass barriers enabling maximum visibility with the dimensions of the opening.
• SmartStop and SmartClose security system
• High thermal insulation
• Fracture resistant up to RC2 scale (WK2)
(WK2)

 
Alumin-Produktet---24

Schüco ADS 80FR30; FR60; FR90

The facade is tested in accordance with European standards (EN 1364/1634) and the German standard DIN 4102 and fulfills the requirements of fire protection classes.
The system of enduring fire classes are 30, 60 and 90 minutes.
Aperture limits are up to 1400mm x 3000m.
Fracture resistant up to RC3 scale (WK3).

Alumin-Produktet---25

Schüco AWS 57 RO

With the Schüco AWS 57RO system, has been achieved energy efficiency and the roof lighting system.
Such a system finds application almost everywhere in any smart system.
• Possible opening surface is up to 90 °.
• Width and height is up to 2100 mm.
• Maximum surface = 2.73 m2.
• Maximum weight = 120 kg.
• Roof slope is from 7 ° to 75 °.

 
Alumin-Produktet---26

Schüco AWS/ADS 90BR FB4(RC4)

Schüco AWS / ADS 90BR FB4 (RC4) offers a bulletproof system of class FB4 in accordance with EN 1522.
The narrow width of the profiles, in addition to the bulletproof, responds to other needs such as: Atmospheric conditions, noise insulation, thermal insulation, fracture resistant, there are no color restrictions.

Alumin-Produktet---27

Feal Termo 65, 65VS &65VP

Sipas prEN 10077-2 sistemi TERMO 65 VS dimensionet standarde të dyerve 1100×2200 izolimi termik Uw = 1.7 [W/m2K] me Ug = 0.6 W/m2K

Sipas prEN 10077-2 sistemi TERMO 65 VP dimensionet standarde të dyerve 1100×2200 izolimi termik Uw = 1.5 [W/m2K] me Ug = 0.6 W/m2K

Alumin-Produktet---28

Feal Termo 50

The technical specifications of this system are:
• Frame thickness: 50 mm.
• Frame thickness: 58 mm.
• Closing lid: 8mm.
• Glass placement: 6-36mm.
• Termination of polyamide thermal bridge: 14.8mm. According to prEN ISO 10077-2 TERMO 50 system for windows with dimensions 1230 × 1480 the thermal insulation is Uw = 2.3 [W / m2 K].

Alumin-Produktet---29

Feal Z 50 & Z40

The technical specifications of this FEAL Z-50 system are:
• Frame thickness: 50 mm.
• Frame thickness: 58 mm.
• Closing lid: 8mm.
• Glass placement: 6-36mm

The technical specifications of this FEAL Z-50 system are:
• Frame thickness: 40 mm.
• Frame thickness: 48 mm.
• Closing lid: 8mm.
• Glass placement: 3-28 mm.

Alumin-Produktet---30

Feal TERMO 80&120

The technical specifications of this FEAL TERMO 80 system are:
• Frame thickness: 124mm with three sliding panels / 80mm with two sliding panels.
• Shoulder thickness: 32 mm.
• Glass placement: 4-18 mm.

The technical specifications of this
FEAL TERMO 120 are:
• Frame thickness: 185 with three sliding panels / 120mm with two sliding panels.
• Shoulder thickness: 56 mm.
• Glass placement: max 44 mm.
• Thermal coefficients: Uw ≥ 1.4 W / m2K.

Alumin-Produktet---30

Feal Termo 120D

The technical specifications of this FEAL TERMO 120D+ are:
• Frame thickness: 126.
• Shoulder thickness: 56 mm.
• Glass placement: max 44 mm.
• Thermal coefficients: Uw ≥ 1.4 W / m2K.

Alumin-Produktet---32

Internal partitions with thin profile

Narrow width of profiles starting from 30mm x 30mm.

en_USEN